Recent Mold Remediation Posts

Does Your Home Need a Mold Test?

9/19/2019 (Permalink)

Close-up of person hand wearing gloves measuring wetness of a moldy wall Mold testing in a Hope, RI home

In order to remove mold and mildew from your Hope, RI, home, you first have to find it. If you want to find and identify mold growth, a mold assessment can help you do so.

Types of Mold Testing

There are several different types of mold tests available, each with their own benefits:

  1. Bulk testing determines the amount of mold on various surfaces in your home, such as carpet and drywall. Pieces of the material are sent to the lab and examined.
  2. Air testing identifies the amount of mold spores in the air.
  3. Surface testing determines the concentration of mold spores on different surfaces in the home. Surface testing differs from bulk testing in that mold is collected from the surface and then sent to the lab rather than sending entire samples of the material to the lab.
  4. Culture testing uses a small sample of mold from a home and grows it into a colony that is large enough to be identified.

Because the concentration of mold spores can vary at different times and in different locations, it may be beneficial to do several types of tests and do the mold assessment more than once. This will give you the best idea of the amount, location and type of mold in your home.

Reasons To Test for Mold

There are many reasons people test for mold in their homes. Knowing the details of your mold problem can help you in the decision-making process. Toxic molds, including black mold, require extra caution to prevent illness. Molds in certain locations, such as drywall and insulation, may require professional intervention. The following situations might call for a mold test:

  • Finding the source of a moldy smell when there is no visible mold
  • Determining if certain physical symptoms (headache, burning eyes, etc.) are caused by mold
  • Determining if mold remediation efforts were successful
  • Identifying the type of mold

A mold assessment can help you create a plan of action for dealing with any mold problem you have. An experienced restoration team can guide you through the entire process, from testing to restoration.

How Do I Prevent Mold in My Building After a Leak?

7/22/2019 (Permalink)

Broken pipe in a Mount Pleasant, RI building

How Do I Prevent Mold in My Building After a Leak?

If your building is suffering from water damage in Mount Pleasant, RI, there is the potential risk that the sitting water will become a breeding ground for mold. If your building recently suffered from flooding as a result of a storm or leaking pipe, or if you simply had a large spill that allowed a large quantity of water to get into your walls or floors, then you need to make sure you address the problem before it grows into something worse.

1. Act Quickly

The number one method for mold prevention is to stop them from developing in the first place, and the easiest way to accomplish this is to make sure that you don’t allow any leaks or spills to sit for long. Cool, damp settings are a breeding ground for mold, and you’re asking for trouble if you leave water damage untreated. When you discover a water spot, dry it out as thoroughly as possible. An absorbent material like a towel is a great way to sop up water from carpets, while fans can be used to blow fresh air on damp walls or wood floors to help dry them out more quickly and prevent mold growth.

2. Check the Source

Drying up after a spill or leak is important, but if you don’t address the underlying problem which led to the damage, you will likely have to deal with the same problem again in short order. Check for any dripping pipes or leaks in your roof that are leading to a drip in your walls and creating the wet spots. If necessary, shut off water to the area the leak is occurring in order to perform necessary repairs on the pipe.

3. Seek Help

When you have a major leak or if you fail to prevent mold from growing, it may be time to speak with a professional. A consultation from a qualified plumber or mold cleanup specialist allows you to address any problems as a result of the water damage and prevent future occurrences.

Understanding the Types of Mold That Can Grow in Your Home

5/23/2019 (Permalink)

If mold growth is a problem in your Hope, RI, home, make sure that you are aware of the different types

Types of Mold That Can be Found in Your Home

When you learn that a mold outbreak has infested your home in Hope, RI, you may come across many different types of mold that have found their way into various parts of your living space. It’s important to understand the different forms of the substance, so you can quickly address your mold growth problem. Here is a useful guide to the various types of mold that can be found in your home.

Black Mold

One of the better-known types of mold that can appear in homes is Stachybotrys atra, which is also referred to as black mold. Like many other species, black mold grows in moist environments and feeds off the wet atmosphere. This moisture can result from any of these causes:

  • Water damage
  • Flooding
  • High humidity
  • Leaks

With enough moisture in the air, black mold will only continue to spread. Before this happens, it is crucial to contact a mold remediation expert immediately to schedule a black mold cleanup. 

Cladosporium

Cladosporium is one of the most common types of household mold, and it tends to have a black or green hue. While it typically grows on wood and painted surfaces, it can also be found on the backs of toilets and air ducts. Similar to black mold, Cladosporium mold growth can occur in areas where high humidity or moisture is present.

Aspergillus

Another common form of mold that can grow both indoors and outdoors is known as Aspergillus. It is primarily found on dead leaves and other decaying matter outside. When it attaches itself to clothing and shoes, it can be dragged indoors as well. Aspergillus may also be present on air conditioning units if they still contain traces of moisture.

If mold growth is a problem in your Hope, RI, home, make sure that you are aware of the different types. By working with a mold remediation expert, you can resolve the issue and enjoy a cleaner living space.

The Unreliability of DIY Mold Testing Kits

3/4/2019 (Permalink)

Mold testing should be left to the professionals

The Unreliability of DIY Mold Testing Kits

When you come across potential mold in your home, you are likely met with feelings of anxiety and dread. Also, while you may already know that it is not the safest idea to handle even suspected mold on your own, there may be feelings of embarrassment at the thought of having someone out to inspect your home. Therefore, you may do what you feel is the most rational thing, and you go to the local big box chain to purchase a DIY mold kit. However, while there are several kits available, it is essential to understand that DIY mold testing is not definitive or even accurate.

1. Perpetual False Positives

While a mold kit may provide good and trustworthy information on occasion, these tests are notorious for giving false positives, meaning that a test may say mold when you have none. Additionally, professional tests are performed in a controlled way, resulting in a better result without risk of cross-contamination.

2. Mold Spores versus Infestation

Mold testing performed on your own may also fail to distinguish between mold spores and an infestation. The truth is that every home has some level of mold spores present and no amount of cleaning and removal will eliminate all spores 100 percent. While not every house has a mold infestation, it is critical to identify through professional tests which you are dealing with.

3. Hidden Threat

Also, many home tests only focus on surface areas, which then provides a limited view of potential threats. Many infestations occur in hidden areas, such as in wall cavities or crawlspaces. Swabbing the surface of a wall, counter or ceiling will likely not inform you of the real damage and threat.

4. Environmental Hygienist and Remediation Specialists

DIY mold tests are no match for the professional tests performed by environmental hygienists and mold remediation specialist in the Fox Point, RI, area. These individuals are specially certified and trained to deal with the testing, diagnosing and removal of a variety of molds.

Mold testing should be left to the professional. While home kits provide a cost-effective means for initial tests, these products are known for false positives and other limitations.

What To Do When Mold Is Found In A Providence, Rhode Island House

2/13/2019 (Permalink)

Mold in a local Downtown Providence home.

There are quite a few people who may find mold or mildew in their home in Providence, RI, and they must take steps to ensure that they have done something about the terrible odor in the house.  A Microbial growth or fungus in the house may cause quite a few problems for the homeowner, and this article explains how the house may be cleaned to ensure it is safe to enter every day.  Steps that are taken by an environmental hygienist during mold cleanup will be quite varied, and each step must be completed properly to make the house safe again.

What To Do When Mold Is Found In A Providence, Rhode Island House

#1:  Finding Mold In The House

 Finding mildew or a fungus in the house is not all that fun for a homeowner, and they must feel as though they have cleaned out the home completely before moving back in.  There is a musty smell that is created by a microbial growth in the house, and a fungus may hide away for some time before it it cleaned up.  The growth may spread, and there is a chance the people in the house will be sick because they are breathing in dirty air all the time.

#2:  Cleaning The House 

An environmental hygienist in Rhode Island will ensure they have checked the home from top to bottom, and they will begin a cleaning process that scrubs out every bit of what was found.  Growths that are found in the house are quite difficult to clean with standard materials, and they  must be scrubbed using something that was made for that purpose.  Mold cleanup is not complete until the home has been inspected by a professional, and they will not sign off on the home being clean until they know the house has no signs of any growths at all.  They will complete an inspection to ensure everything has been done properly, and they will give certification to the homeowner when finished. 

#3:  How Long Does The Process Last? 

Anyone who calls for services in Rhode Island must allow proper time for the work to be done.  They will notice quite quickly that their home will be much cleaner after time has been allowed for their homes to be cleansed.  The house will be cleansed in a manner that is easy for everyone to understand, and the smell that is found in the home will begin to fall away after a time. The company will begin to do air quality tests in the house, and they will pass on all results to their homeowners.  The homeowners who has information on their homes are more likely to feel comfortable when they reenter the home, and they may use the information they were given when selling the home.

 #4:  The Home Must Be Checked Often

 Homeowners who have concerns about their homes must have someone come out for an air test that will help them ensure the building is safe to inhabit.  They may have a yearly test done that will help them find the quality of the air, and they will notice how simple it is to complete a test once they have begun with the company. Someone will come out to the house prepared to help them, and they will show the homeowner how the air has compared with the last year. Results are checked often, and the comparison will show if there are more growths in the house.

Every homeowner who has concerns about growths or other toxic materials must begin working with a mitigation company at once. They will speak to the company about how the growths may be cleaned, and they will learn what is required to keep the house clean.  A free estimate will be created for the customer, and it will show them the work that needs to be done.  The work will be done in a manner that is consistent with industry standards, and the homeowner will notice they have several options to keep the house clean regardless of how bad the problem is.

Recognizing Mold – What It Is and Isn’t

1/21/2019 (Permalink)

Bedroom wall damage in Hope, RI

Most property owners know to have a high index of suspicion if you see something black and furry growing on your walls. But do you really know what’s black mold and what’s something else? Knowing the difference can make a big difference for your wallet, not to mention your peace of mind. A house mold inspection is your best bet but here are also a few tips for knowing what is mold in your Hope, RI, home, and what’s not mold.

Understanding Mold

Recent years have seen mold gain lots of media attention. It’s not always harmful – indeed, some forms are used to make medicines. But some of the nastier sorts have been linked to:

  • Eye and throat irritation
  • Allergies
  • Unpleasant smells
  • Damaged property

What Mold Isn’t
Surprisingly, there are numerous mold lookalikes.

- Mildew
This actually is a kind of mold. But mildew tends to grow on flat surfaces and causes far less damage than mold.
- Dirt
With its black, sooty and caked-on appearance, dirt can be a surprising lookalike for mold. But even stubborn dirt doesn’t require professional removal – just a sponge and some elbow grease.
- Soap Scum
Gathering in wet areas, soap scum can also darken and look like mold. But soap scum doesn’t tend to smell and like dirt, it’s easily removed with a little effort. A mold inspection can help spot the difference.

What Mold Is
So, we know what isn’t mold, but what is? You can get some general clues if what you are seeing is:

  • black and velvety in appearance
  • has a musty odor
  • doesn’t wipe off
  • is in a dark area

The best way to know what you’re dealing with for sure is to get a mold inspection. Next, you’ll know what steps to take for mold removal and to ultimately get your property back in tip top condition.

5 Steps of the Mold Mitigation Process

9/10/2018 (Permalink)

Dehumidifier preventing microbial growth in Providence, RI

It is not uncommon for a home that has sustained water damage to also develop black mold. If you discover mold in your home in Providence, RI, you will likely need the services of mold remediation experts. These certified technicians take care of your mold problem and get your home back to normal, and they use the following five steps to do so.

1. Protection

Before they begin the mold cleanup process, technicians don protective gear to cover their eyes, nose, mouth and skin. This keeps the increased number of spores in the air out of their airways and sensitive membranes.

2. Containment

To take control of the black mold problem, the specialists must make sure it doesn't contaminate other areas of the house. They restrict air flow from the damaged section and seal it off with thick plastic sheets.

3. Demolition

If mold has attacked a wall or other porous surface, the area will have to be replaced, but first, it must be torn out. Clearing out the parts that have mold damage is essential to fixing the problem.

4. Sanitation

The remaining structures must be sanitized before it's safe for family member and pets to reenter the home. Technicians may use anti-microbial chemicals to neutralize any germs that are present. They may also use gamma irradiation to sanitize documents or books.

5. Dehydration

This term is bad news when applied to a person, but when applied to a house, particularly one that has prior mold issues, it can be a godsend. A dry environment is less likely to be hospitable to mold.

A black mold problem in your home is best handled by certified professionals who specialize in mold remediation. They have the knowledge and the tools to work through the steps of the process efficiently. They can quickly assess the situation, answer any questions you have and decrease the chances of mold growth returning.

6 Reasons Mold May Grow in Your Home

5/22/2018 (Permalink)

Black Mold can grow in your Providence home

Black mold and other fungus varieties do not require much to show up in your Providence, RI, home. Warmth, moisture and a food source are enough to start a colony of growth. If you have found mold in your house, you may need to talk to a residential mold expert to understand why it showed up. Figuring out why it grew can help you and your mold cleanup crew remediate the problem.

1. High Humidity: Any type of moisture problem, including high humidity, can encourage the start of mold. You should try to keep your house at or below 45 percent humidity to discourage this fungus growth.


2. Condensation: Even condensation on your windows, near your AC unit or in the bathroom can create the moist environment needed for mold. If you notice beads of water, you may want to find a way to get rid of them.


3. Broken Pipes: Unexpected water problems can also cause mold growth. If a pipe breaks or bursts, you typically have 24 to 48 hours to cleanup the problem before black mold starts to make a home. Mold can start to grow so quickly because the spores are everywhere already.


4. Broken Supply Line: Supply lines typically carry clean water into your home, but even clean water can encourage mold growth. You might have a longer window before mold growth starts.


5. Leaks: Leaks from toilets, faucets, dishwashers, washing machines and other appliances can lead to a mold colony. Roof leaks could also create a moisture problem big enough for mold to start making a home.


6. Flooding: Flood waters are often caused by storms, rising rivers and other potentially dirty water sources. This water can be full of bacteria, spores and other contaminants that allow mold to thrive.

Black mold typically starts growing when there is a substantial water source. Whenever you have a moisture problem, this fungus can start to thrive in your home.

For more on Providence click here

How Does Mold Containment Prevent Cross Contamination?

4/17/2018 (Permalink)

Commercial mold damage and clean up procedures

If you are dealing with mold contamination in a commercial property, a mold cleanup service may recommend containment. Containment can help to prevent cross-contamination, such as the spread of mold to a new environment or the reintroduction of mold spores back into a structure that has been treated for mold.

Several containment procedures used by mold remediation services include the following:

• Turning off HVAC systems and fans: Adequate ventilation plays an important part in promoting drying after water damage and can prevent mold from developing. Once mold is present, however, you should turn off systems that circulate air from the contaminated portions of a structure to unaffected areas. If spores spread and find other moist surfaces conducive to growth, the mold problem in your commercial property may worsen.

• Using polyethylene sheeting and plastic materials to seal off an affected area: If a mold cleanup service discovers anywhere from 10 to 100 square feet of contamination in your property, they may recommend limited containment. This involves using a single layer of polyethylene sheeting to enclose the affected area as well as a slit entry and exterior flap. It is also important seal off air supplies and vents, doors, and pipe chases.

• Building negative air chambers to create negative air pressure: If more than 100 square feet of your property is contaminated or mold growth is extensive, cleanup specialists may create an airtight containment area. This involves plastic barriers and double layers of polyethylene and may also require a decontamination chamber.

With the exception of the first point, these methods should be performed by experts as part of a complete mold cleanup and remediation procedure. Containment can be the best way to prevent cross-contamination in a commercial property in Providence RI. Make sure the cleanup and remediation service you use performs limited or full containment depending on the extent of the mold contamination.

For more information on Providence click here.

Saving Fine Art From Mold Damage: What You Need To Know

3/29/2018 (Permalink)

Cleaning after Mold Damage to Home Content

Water damage in the home can be frustrating, but when water touches fine art, it can be devastating. If your artwork survived the initial influx of water, you still have mold damage to deal with. Cleaning mold off antique artwork is easier said than done, as you cannot just employ the typical mold remediation techniques given to you by your Providence, RI, mold cleaning team. If you want to keep your fine art free and clear of mold even after mold spores have taken root, here is what you need to do:

• Act quickly
• Work smart
• Work with a conservation specialist

Act Quickly

When dealing with mold growth on fine art, you need to act fast. It’s important to note that even if water never touches a painting, that painting can still be affected by mold spores that sprout nearby. Additionally, your home didn’t even have to be in a flood for mold to affect your paintings; damage from mold can occur to paintings that have been stored in dark, damp areas for extended periods of time. Begin mold cleaning efforts as soon as you discover mold, as once mold is present, it can spread at a rapid rate.

Work Smart

When removing mold damage from fine art, you need to be much more diligent than you would be with normal household items. Start by removing and cleaning all frames and any non-art surfaces. Then, research what type of artwork you’re dealing with. Each type of painting needs to be dealt with differently, and approaching the mold remediation process the wrong way may ruin your painting entirely. In most cases, it’s best to work with a conservation specialist regarding processes and techniques.

Hire a Conservation Specialist

If you have never removed mold damage from a piece of fine art before, the best thing to do would be to call a conservation specialist. Professional conservators deal with these kinds of issues all the time and can help you restore your painting without sacrificing its integrity.

If you have fine artwork that was damaged by mold, you need to be diligent in your mold cleaning efforts. If you don’t feel comfortable restoring the painting yourself, call in the professionals.

Visit us at http://www.SERVPROprovidence.com for more information. 

How to Handle Mold Damage Until Help Arrives

2/27/2018 (Permalink)

Taking Charge of Black Mold

It might be your first instinct to try and take charge of a black mold problem in your Federal Hill, RI, business. However, mold cleanup should be left to certified professionals who know how to manage the situation when it’s out of control. If you’ve come across a lingering odor in your building or moisture problem that quickly escalated into extensive mold growth, it’s time to consider fast mitigation. Here are a few tips on how you can handle mold damage until experienced help arrives to clear the area.

1. Turn off your company’s HVAC system. The problem with mold is that even if you’ve found only a small designated area where growth seems to be spreading, the airflow through your HVAC system could be carrying spores all across the building. Leave the air off until trained experts have a chance to investigate the issue and act accordingly. Let them give you the signal when it’s acceptable to turn it back on.

2. Shut off the water until the leak or water damage is contained. High humidity and elevated moisture in an enclosed space create prime breeding grounds for black mold to reproduce and disperse. If a moisture issue has been detected and the fungus is thriving off the source, shutting off the water can halt the flow to the mold and stop causing greater damage to your business.

3. Don’t touch or disturb the moldy area and stay out of the infected space. Breathing in mold spores or touching the actual mold itself can be dangerous. Avoid these possibilities by staying out of the room. If other employees are present, instruct everyone to keep their distance as well until the professionals arrive.

When a moisture problem hits your business in Federal Hill, RI, and black mold pops up unexpectedly as a result, it’s best to leave it alone. Contact proper remediation specialists to handle the mold cleanup and stay out of their way until the office is habitable again.

Tips to Prevent Mold Over Your Vacation

12/7/2017 (Permalink)

Tips to Prevent Mold Over Your Vacation

If you are planning on leaving home for an extended period, it’s important to prepare your house for your absence. Regular home systems that require occasional maintenance can wind up being disrupted without any intervention if you don’t, and that means you could wind up with water damage that includes mold growth. All it takes is a leaky pipe or an unmonitored drip in the sink. A week or two of that drip going unmonitored is enough to do it. To make sure you don’t have moisture problems when you go on vacation, check out these mold prevention tips.

Change Your Home Environment While You Are Away

Mold grows in moist, warm environments best. The more you can reduce either attribute while you are away, the better. Here are some terrific tips for preventing mold that you can easily put into place before vacation:

Check your plumbing for leaks, and consider turning your water off during the interim. Fix any dripping faucets or minor leaks you find, even if you don’t turn the water main off while you are gone.
Lower your thermostat temperature. Fifty-five degrees Fahrenheit should be more than enough to prevent freezing, and it will save you money while discouraging mold growth in the winter.
During summers in Providence consider leaving your climate control settings in place. Air conditioning removes excess moisture from the air while it cools the environment.
Empty and put away pet bowls and water dispensers. It might seem silly, but this mold prevention tip can save you money in the long run. Your furry friends are probably staying elsewhere if you are gone anyway!
Clean and empty all the sinks and dishwashers in the house.
Clean any aquariums or other open water sources, and cover them if possible to discourage evaporation into the environment, which will increase humidity.

Conclusions

If you follow through with these tips, you can easily avert the likelihood of developing a mold problem in Providence, Rhode Island while you are on vacation. Of course, regular mold inspections done by mold remediation specialists will be the best way for you to make sure you don’t develop a problem in the future. Visit http://www.SERVPROprovidence.com for more information on mold.

Everything You Need To Know About Black Mold

8/30/2017 (Permalink)


Everything You Need To Know About Black Mold


Black mold, also referred to as Stachybotrys chartarum is a type of mold genus that reproduces asexually. It is a fungus that releases spores which feed on organic materials found in households. Black mold has negative implications. Removing black mold can be a costly exercise especially if the infestation is severe.

Learning how to get rid of black mold efficiently can go a long way in saving the home owner money as well as ensuring good health for their families. Dry rot is a type of fungus that mostly affects timber or wood. Dry rot mostly thrives in moist conditions weakening the wood to the point of disintegration. Dry rot is identified by the presence of darkening cracks in the wood structure that may have mushroom-like growth.

It causes a smelly odor that though not harmful, can be very unpleasant. Since dry rot growth mostly occurs in moist conditions, mitigation involves repairing all broken pipes in the house as well as doing proper plumbing to prevent further leakages. Mildew is a type of white fungus that grows on living plants. Mildew produces a very smelly odor.

Mildew growth remediation is done by use of a scrubbing brush to remove the growth. It is not necessary to consult a restoration company. The process of remediation is carried out outside the house to prevent the spread of mildew to other parts of the house.

Mold growth behind walls is mostly as a result of pipe breakage behind the walls. The presence of moisture provides conducive conditions for mold growth to thrive. One of the signs of mold growth behind walls is peeling of paint on the wall. The presence of a smelly odor may also indicate mold growth behind walls.

Identification of mold growth behind walls is mostly made by inspection methods involving talking to a mold specialist or a representative from a restoration company. Mold mitigation from behind walls is done by repair of leakages on the wall to get rid of moisture. Remediation also involves finding a mold removal professional to remove the fungus as doing it yourself may pose a risk.

Mitigation of mold in home can be done by fixing leaking roofs and pipes, ventilating the shower areas as well as the laundry areas.

Mold in home should not be disturbed as it can cause scattering of the spores facilitating its spread. In cases where there is presence of mold in home, air conditioners should be turned off to prevent mold migration. Mold removal on non-porous surfaces can be done by cleaning and sanitizing the surface thoroughly then drying it. Mold removal takes about one to five days depending on the size of the building where the mold is growing, the material on which the mold is growing as well as the quantity of mold present. Once the mold is removed, the smelly odor brought about by the mold clears.

Mold mitigation techniques include cleaning up and drying our homes thoroughly and adding mold inhibitors to paint before painting. Many industrial buildings have daily working plumbing systems. It is therefore not uncommon to find commercial mold damage in such premises. Building regulations guide building contractors and maintenance staff to prevent commercial mold damage as early as the initial building stages. To help curb commercial mold damage, contractors are advised to use mold resistant paints on the walls. Reduction of humidity levels between thirty and sixty percent goes a long way in decreasing mold growth hence preventing commercial mold damage.

Deodorization involves using the right deodorization techniques to remove the smelly odor. One of the most efficient deodorization methods is UV ozone generation which includes use of oxidization to eliminate the odor particles by adding more oxygen in the air. Another effective deodorization method is neutralization which involves the use of an equalizing chemical which neutralizes the smelly odor. Another method is the use of absorbents. These operations are carried out by a trained professional from a recognized restoration company.

The mold damage remediation process includes;

Isolating the mold damage affected areas from other areas.
Misting the areas affected by mold growth so as to suppress dust.
Removing all the materials damaged by the mold, placing them in plastic bags and disposing of the bags as trash.
Cleaning and drying wood and non-porous surfaces using wire brushes.
Conducting a feasibility test to ensure all mold damage areas are free from contamination visibly.

It is however, important to note that all areas with mold damage should be adequately cleaned by a restoration company to avoid instances of the same process being repeated again. Mold growth is a process that can easily be contained if done in the right manner.
Visit http://www.SERVPROprovidence.com for more information on mold.

Professional Mold Remediation Explained

7/31/2017 (Permalink)


Professional Mold Remediation Explained

Molds have microscopic pores that are found freely in almost all environments both indoor and outdoor. Any business or home can quickly be infected with mold if there is an introduction of water or moisture that results from water damage. Mold in home can grow unnoticed because it is often hidden in the walls, under ceilings, behind tiles and other hidden places. This is because the sources of water are silent such a small leakage in the sink, tap or plumbing system. While in advanced condition, mold damage can result in smelly odor and dry rot especially under the carpet or other hidden places. Since black mold spores cannot be seen with human eyes, it is important to let mold removal and deodorization be conducted by professionals.

Professionals who specialize in commercial mold damage have a strategic plan to eradicate fungus. Although a professional mold restoration company can help you with removal and mitigation, it is important to remember that doing things right and responding quickly to possible mold infestation is crucial. This will help prevent further mold damage that can have a negative effect in your home. The following are steps that a professional mold restoration company will consider to eradicate mildew from your house.

When investigating mold in home, it does not only involve looking for visible mold growth behind wall. Mold growth is invisible because it often grows in areas that you cannot see. The devious mildew behavior requires skill to determine the source. The first thing is to understand that behind all mold growth there is a water problem in the house. The professionals look for the moisture sources, which will help them to locate the mold growth behind wall. In advanced mold damage, the experts can detect the smelly odor and dry rot to ascertain whether a certain area is infested.

Documenting and creating a mold remediation plan:
Mold in home mitigation requires that the areas causing moisture are stopped and rectified. Before beginning commercial mold damage clean up, it is important to document the fungus situation by writing, taking videos or photos. The documentation is important because it helps to manage liability.

Mold in home can be extensive, depending on how much time has passed before reporting. The main goals for mold removal and remediation are to clean up all mold growing in your home. Professionals also ensure that the homeowner is not exposed to the fungus. A professional mold restoration company will have a clear guideline on how to handle mildew at every level based on square footage.

The remediation of mold growth in your home usually involves cleaning up the existing dry rot and mold growth behind wall. The most important thing is that they have professional equipment and tools to prevent self-exposure. They also dry up the moisture areas and rectify the leakages that cause mold in home. Deodorization is done in the cleaned areas to remove smelly odors and ensure that the mildew spore will not germinate again. A professional mold restoration company will have two level mitigation guidelines to clean up the house.

Level one of mold removal usually involves repairing of the water issues, isolating the contaminated areas, deodorization to suppress the mold, and removal of contaminated materials and putting it in plastic bags.

Level two of mold mitigation usually involves cleaning the infested materials and areas, conducting visibility test, and drying. Some damaged items may require replacement or repair and deodorization before being used again.

It is important to use professional residential and commercial mold damage services because they have skills and knowledge to handle all types of fungus including black mold. They will ensure that mold growth and the smelly odor is effectively removed.
Visit http://www.SERVPROprovidence.com for more information on mold.

Handling Mold the Proper Way

6/22/2017 (Permalink)


Handling Mold the Proper Way

Mold damage is a serious problem many homes and businesses face. When mold damage occurs, it’s imperative it’s handled immediately and correctly. Proper remediation and mitigation require knowledge regarding how this fungus forms, what it means to clean it up, and how to stop it from forming again. Mold damage is not something anyone can afford to ignore, which means it’s time to call for professional mold removal, remediation, and mitigation when any mold damage occurs. Mold in the home and commercial mold damage are both dangerous, and both must go through the proper removal and remediation process the moment it’s found. Waiting even a day to start the removal process can cause significant damage in addition to what’s already occurred.

Identifying the Source of Mold in the Home or Commercial Mold Damage

Finding the source of mold damage is a priority. Mold in the home and commercial mold damage both originate in one location, and it’s important to find this location immediately. Mold in the home as well as commercial mold damage likely occur inside a wall where a pipe is leaking, in a bathroom, or in a basement where humidity is high and moisture levels are inviting. Mold is a fungus that forms when the right conditions occur.

Once the source of the moisture that allows mold to form is located, it must be rectified. Leaks must be fixed, and other places in which moisture might enter a home must be eradicated. Once this occurs, mold can be identified and removed from the home or office through the remediation and mitigation process.

The Signs of Mold in the Home

Signs of mold are very common, but they’re easily missed by home and business owners. The first sign this fungus might be present in the home is the presence of mildew. Mildew needs very similar conditions to grow, but it rarely causes concern in the home or office. If mildew is present in a bathroom or basement anywhere, it might indicate that mold could either begin growing before too long or has already started growing somewhere nearby. If anyone notices mildew, it’s a sign that fungus is a problem in need of remediation.

The other sign of mold is a smelly odor that requires frequent deodorization. Whether it’s plugging in a few air fresheners, spraying something, or lighting candles, deodorization is fine to use. The only thing people must remember with deodorization is it’s not a final solution to the problem. Deodorization can mask a smelly odor, but it’s not enough to fix the problem at hand. The presence of a smelly odor is a sign mold might be present somewhere nearby even if it’s not visible.

Calling for Professional Mold Removal

Professional mold removal is required when mold is found in the home or the office. The removal process is intricate, and it’s the best way to ensure mold damage does not become worse. Mold removal involves identifying mold, the source, and eradicating it. Remediation and mitigation allow homeowners and business owners a chance to fix the problem at the source right away.

Mold removal is so important because mold grows so fast and spreads so quickly. It’s not something anyone has time to ignore. It takes less than three days for mold to spread rapidly throughout any building, which causes major damage to walls, floors, and even the material items present in the building. Mold removal must occur as soon as someone noticed mold is present because of mildew or a smelly odor.

Mold is nothing to play with. It’s not all dangerous, but the list of negative effects mold has is a long one. Cal for help. It’s safer, faster, and a much better solution to letting it go or improperly caring for it. When mold is eradicated correctly the first time, the chance of it growing back again is much smaller.
Visit http://www.SERVPROprovidence.com for more information on mold removal.

How Professional Mold Removal and Remediation Works for You

5/29/2017 (Permalink)


How Professional Mold Removal and Remediation Works for You

Mold damage is a major problem that affects millions of people worldwide. Even if you're living in a newer home that was recently built, mold can still become a real issue. The problem with mold damage is that it can spread relatively quickly. A small patch of fungus or mildew might look tiny at first, but within a matter of weeks, you're dealing with a huge mildew growth problem that creates a smelly odor and structural damage. If you think you're dealing with a mold damage problem, be sure to contact a local mitigation and remediation company specializing in commercial mold damage cleanup.

Finding the Mold Problem

Before mold removal can begin, you need to know that you have a problem. You or the remediation company can check for fungus and mildew growth. To find an issue, you're going to want to look for black splotches on walls, floors and ceilings. Look in areas that deal with water and condensation, like a bathroom ceiling or a hot attic. Some people even deal with fungus growth and mildew in areas where pests are living, so if you have a pest problem, look to see where they're hiding out.

Contacting a Professional Remediation and Mitigation Company

Once you know that you have mold in your home or are dealing with commercial mold damage, it's time to call in the remediation and mitigation experts. The beauty about dealing with a professional commercial mold damage company is that they use all of their own deodorization tools to get rid of the spores and smelly odor that's overtaken your home or place of business. This takes the guesswork out of mold removal for you because they do the entire project from start to finish.

What the Mold Damage Professionals Do

To begin, the mitigation experts will come into your home and deal with the fungus growth head-on. They bring their own deodorization supplies to thoroughly clean the air of any potential spores that could resurface. This is crucial because it prevents the mold from growing back, which is something the average homeowner wouldn't be able to do with their own chemicals and tools alone. Expert deodorization takes place to remove the smelly odor from the air and leave the room feeling fresh and clean. The commercial mold damage professionals may also use drying methods to keep an area water-free while doing the job. Mold removal takes a few days, but the experts may have to come back several times in order to ensure that no mold has regrown within the home.

Pricing and Options

When it comes to removing mold in the home or business, the price can sometimes be substantial. If you have homeowners or property insurance, you might have coverage on mold remediation. If you do have a policy that covers this project, the company will typically be paid by your insurance provider. If you don't have coverage, you can come to an agreement with the mold removal company on a price that you'll be able to afford. Unfortunately, despite the high price of mitigation, mold removal is an absolute necessity once you know there's a problem with mold in the home.

Preventing Mold from Coming Back

If you ever notice a smelly odor in the house or have recently dealt with mold in your home, it's imperative that you prevent it from becoming a problem again. It might even be a good idea to contact the experts and have them come to your residence at regular intervals throughout the year to check for a mold growth problem and to do professional deodorization if it's needed. When your home is free of mold and mildew, you and your family can live happily and the value of your home will go up because you are taking the proper steps to ensuring that the interior is kept clean and mold-free.
Visit http://www.SERVPROprovidence.com for more information on mold removal and remediation.

How To Ensure Proper Mold Remediation

4/25/2017 (Permalink)

How To Ensure Proper Mold Remediation

It is normally for microscopic mold spores to be present in homes. In small amounts, it is completely okay and even natural for them to exist. What is not natural is when there is an abundance of growth. If this occurs then actions need to be taken to remedy this situation. Action would require having a professional environmental hygienist address and handle the right route to handle this process. Proper mitigation is the only way to ensure that recurring problems are avoided.

Microbial growth, mildew, and fungus can become very hazardous. If you have experienced any of these things in your home or business then you need to get in touch with an environmental hygienist to fix this problem. An environmental hygienist can help you with this situation. Here are some things to keep in mind when figuring out if you need help to get rid of mold.

First, keep in mind that microbial growth and mold are not the same thing. Mold is eukaryotic micro-organisms that fuel off of dead organic material like wood. Microbial growth is bacterial growth that happens through cell division. An environmental hygienist can help to determine what type of growth you have in your house or business. Contact a professional to ensure that everything is done to safely handle any situation. Ignoring the problem and not getting proper mitigation can lead to serious and recurring problems. If you see any type of growth call a professional immediately. Seeing growth could mean that the problem is bigger than you think.

If you have a growth problem chances are you also have a water problem. Mold needs moisture to grow, which is why it's commonly found in basements, bathrooms, and in kitchens. So growth is only one problem, moisture is another and other things like mildew, fungus, and microbial growth is a third. An environmental hygienist can help you identify the water source so that you can prevent future growth from potentially occurring while providing mold cleanup services. Take steps to mitigate the situation before serious problems occur.

If growth is found there are essential steps you need to take to ensure that you and other people are not harmed from breathing in and being around potentially hazardous growth. The first thing you should do is contact a professional who knows what they are doing. They will come out and inspect the situation and damage. Next, the issue must be contained to stop it from spreading. After that, air filtration should occur to create high-quality air that people can breathe safely. Next, the damaged material need to be removed and cleaning of the area will occur. These steps are crucial to ensure that the residence is not hazardous and that proper mitigation and mold cleanup was taken.

Mold cleanup is not something you should do on your own. Mold, fungus, mildew and microbial growth require proper mitigation to ensure that problems do not reoccur. So if you have any mildew, fungus, or any other issues, call an environmental hygienist to get rid of it and provide professional mold cleanup services. Visit http://www.SERVPROprovidence.com for more information on mold removal and remediation.

Home & building owners can take steps to prevent mold

6/27/2016 (Permalink)

Intrusion of water into your building can result in mold growth. Water intrusions can result from storm damage, plumbing or equipment failures, long-standing leaks and poor humidity control. When water intrusions are not addressed right away, the resulting damage can present increased risk of harmful mold growth.

If the humidity and moisture levels in a water-damaged environment are not promptly returned to normal, mold spores may grow and multiply. Organic materials found inside a building, such as wood, paper, drywall and insulation, provide food sources for mold to flourish. Excessive mold growth can lead to indoor environmental conditions that pose a health threat.

SERVPRO handles water damages every day and know prompt action is required to prevent mold growth. Mold is more likely to spread when an environment has been subject to moisture for a long period of time. If your property has sustained a recent water damage, it is vital to remove excess water and dry the structure promptly. If there is an ongoing moisture problem in the building, it is important to be alert for:

  • The presence of visible mold.
  • Strong musty odors which may indicate mold is present.
  • ny evidence of past moisture problems that might have caused undetected mold growth.
  • Excessive humidity.

To control mold growth in your business, I offer you the following tips:

  • Repair leaky plumbing and leaks in the foundation of your building
  • Reduce moisture with increased surface temperatures or reduced humidity levels in the air. To increase surface temperatures, insulate or increase air circulation. To reduce humidity, repair leaks, increase ventilation if outside air is cold and dry or use a dehumidifier.
  • Keep heating, ventilation and air conditioning drip pans clean, flowing properly and unobstructed
  • Maintain indoor humidity below 50 percent
  • Perform regular inspections and maintenance on buildings and heating and air conditioning equipment
  • Clean and dry wet or damp spots within 1-2 days
  • Provide adequate drainage around the foundation of your building.  Regularly maintain roof gutters, and ensure that water does not collect near the foundation
  • Insulate windows, walls, pipes, roofs, exterior, floors and other cold surfaces to reduce condensation
  • Watch your utility bills; an unusually high water bill could signal an interior leaking problem 
  • If you are sure or suspect that there is mold in your building, call SERVPRO immediately at 401-941-5500. The longer you wait to call, the mold growth with continue to spread, resulting in a greater chance of unrecoverable property. SERVPRO professionals have the expertise to prevent or mitigate the devastating effects of mold damage.